The Burton 2023 Hitchhiker splitboard bindings are the like friend that will always be there when you need them the most. Out in the backcountry, you need gear that is extremely reliable and always pulls through without fail, which is what these bindings achieve no matter how many km's you're putting in. Teaming up with Spark R&C to collaborate on these bindings to bring together Spark's renowned baseplate and Burton's tech with the comfortable straps and high back features. Not compromising quality, these bindings are lightweight and keep it extremely easy to transition from walk, to ride.
Binding Type: Backcountry / Splitboard
Board Compatibility: Compatible with splitboards using Spark pucks, Spark canted pucks, or Voile pucks. Pucks sold separately.
Flex (1 - Soft / 10 - Stiff): 7/10
High Back: Burton-Designed Single Component Negative Lean High Back with Quick Adjust FLAD
The Highback on the Hitchhiker binding is responsive for the ride down, and comfortable for the hike up. Featuring a quick adjust FLAD with negative lean, you can make each step go further, and make each turn come quicker, without needing tools.
Buckles: Double Take Buckles
Burtons Double Take Ratchets feature one of the quickest and easiest ratchet designs on the market. Helical teeth and 'insta-click' engagement combine for increased torque per crank, and fewer cranks needed to get to your desired tightness.
Straps:
Hammockstrap
The Hammockstrap features a low profile and reduced weight for a more comfortable fit, along with a stitchless construction for maximum response with minimal materials. The pre curved design fits smoothly around your boot and won't be giving you any pressure points.
Supergrip Capstrap 2.0
The Burton Gettagrip Capstrap is one of the best toe straps on the market, with a super grippy interior that holds onto your boot in freezing temperatures, and a design that hugs the contours of most boots.
Additional Features:
Whammy Bar Climbing Wire:
A single fatty climbing wire is built into the baseplate with a side arm lever for easy position changes. Easily switch between stowed, low (12°), and high (18°) and back again.
Snap Ramps and Side-Lock Tesla Touring Brackets:
T1 System bindings slide sideways into the offset touring bracket and are locked into place with our snap ramp, negating the need for pins and cables. Integrated Ibex crampon mounting claws on touring brackets make for quick and easy installation and removal.
Puck Compatibility:
Slide them on and snap the ramp down, or snap the ramp up and slide them off, regardless of whether you're putting them on or taking them off, it'll be super easy and quick. When used with Spark Tesla system bindings you'll be able to conveniently access puck screws with the bindings in place for precise stance adjustment. Pucks sold separately.
T1 Heel Rest:
The T1 Heel Rest catches the climbing wire in the 12° and 18° positions and is specifically designed to hold the T1 step locker in place.
MOST IMPORTANTLY!
When you shop with us - We're a REAL store with REAL people who use the gear you're looking at above. You can chat with us about your gear. Whether it's support for something technical, help with fit or anything else in-between.
Matter of fact, you can do that now, Contact us with the form below if you have any questions and you'll get a real answer from us asap.
See you out there!
Spark R&D Arc Splitboard Binding
Regular price $749.99 Sale price $599.99 Save $150.00The Arc splitboard binding is lightweight for long tours, epic overnighters, trees, and steeps. The baseplate is CNC machined with maximum cutouts to shave weight yet maintain strength and performance while incorporating our industry-leading Tesla T1 binding anatomy. All Arc bindings feature a medium flex version of the Rip ‘N’ Flip highback and a smaller profile Pillow Line ankle strap with flex window for a nice surfy ride down. Every piece of this binding is made in-house with the exception of a few screws and the buckles!
In the Box: Bindings, Tesla touring brackets, T1 heel rests, mounting screws, and Spark pocket tool.
What else do I need? A set of Spark pucks or Spark Canted Pucks
Weight: 626g/ea - 1256g/pr – Medium
Pillow Line Straps
Arc Pillow Line Straps are lightweight - 46% lighter than their fabric strap predecessors. They are ultradurable, comfortable, waterproof, one-piece molded construction, and made 100% in-house. Strap pillows are thin and flexible for a comfortable, conformed fit, while thicker ribs are held off the boot and provide stiffness for a uniquely responsive ride. Arc ankle straps have a smaller footprint than the Surge and feature a flex window for max agility while maintaining support. The toe straps come in one construction for both Arc and Surge models, and are designed to be used as a toe cap but also fit traditionally over the top.
Rip 'N' Flip Highback
The R&D shines with a shape built from 3D scans of popular splitboard boot models, and a list of rad features designed specifically for and fully appreciated by the splitboarder. The Arc highback has a moderate amount of glass fiber fill for medium flex and a surfy feel. The tool free forward lean adjuster (FLAD) offers complete customization from 0° to 22° in ride mode. The Forward Lean Adjuster toggles easily between forward lean position and -13° touring position for easy transitions.
Whammy Bar Climbing Wire
A single fatty climbing wire is built into the baseplate with a side arm lever for easy position changes on the steeps. You can switch easily from stowed, to low (12°), to high (18°) and back again while touring.
Snap Ramps & Side-Lock Tesla Touring Brackets
T1 System bindings slide sideways into the offset touring bracket and are locked into place with our snap ramp. No pins, no cables, no fiddle factor. Integrated Ibex crampon mounting claws on touring brackets make for quick and easy installation and removal.
Puck Compatibility
Slide them on and snap the ramp down. Snap the ramp up and slide them off. The most functional way to attach your binding to your board in ride mode. Period. Spark R&D bindings are designed to work with all puck compatible splitboard models. When used with Arc bindings conveniently access puck screws with the bindings in place for precise stance adjustment. Available in a flat and a 3° canted model. Note that pucks do not come with the bindings out of the box and must be purchased separately.
T1 Heel Rest
The T1 Heel Rest catches the climbing wire in the 12° and 18° positions and is specifically designed to hold the T1 Step Locker in place.
Buckles & Plastics
Ladders and adjusters are produced in-house with unique thermoplastics that maintain flex over a wide temperature range, performing well on spring tours as well as sub-zero suffer fests. All straps incorporate Burton's time-tested bomber buckles.
MOST IMPORTANTLY!
When you shop with us - We're a REAL store with REAL people who use the gear you're looking at above. You can chat with us about your gear. Whether it's support for something technical, help with fit or anything else in-between.
Matter of fact, you can do that now, Contact us with the form below if you have any questions and you'll get a real answer from us asap.
See you out there!
Spark R&D Surge ST Splitboard Binding
Regular price $849.99 Save $-849.99Endorsed by hard chargers everywhere, the Spark R&D Surge ST Splitboard Bindings have undergone sufficient change to warrant an upgrade to "ST" - smooth touring - status. Spark's own overmolding process puts low-friction, high strength plastic over existing metal components to reduce friction and increase durability pretty much anywhere the binding moves, making touring smoother, easier and quieter. Still the stiffest of the Spark offerings, the Surge ST also has a re-designed Asym highback and overmolded ST Whammy Bars where the bar meets the baseplate. A no-compromise approach to the riding after the approach.
Improved ST (Smooth Touring) Mode – Spark injection molds a proprietary thermoplastic over existing aluminum or steel parts in a process called "overmolding," reducing friction and improving durabillity.
ST Whammy Bars – Overmolded plastic blend where the climbing wire meets the baseplate to eliminate stickiness. (Note: not backward compatible with previous Arc, Surge or other older models)
ST Touring Brackets – Overmolded with low-friction proprietary plastic over and through the bracket holes in the aluminum base - strong, smoother pivoting, and lasts 4 times longer than the old brass bushing.
CNC Machined Baseplates – CNC machined baseplates remain solid for max stiffness and durability. All of the baseplate side windows have been partially filled to increase durability and strength
Asym Rip 'N' Flip Highbacks – Asymmetrical design features individual left and right highbacks that slope inward matching the rider’s stance / The upper section is flatter for improved lateral mobility / More material at the base for increased longevity and durability / Higher bottom edge won’t snag on boots with crampon welts or soles that wrap high on the heel
Tool free micro-adjustable from 0° to 22° for complete customization of your forward lean angle
Flippin’ FLAD toggles between your forward lean angle and -13° touring position for easy transitions.
Made with proprietary custom blended materials for improved strength and durability, while minimizing weight.
Lateral slots for our BD Touring Strap for greater edge control while skinning.
Pillow Line Straps – Pillow Line Straps are lightweight, durable, comfortable, waterproof, one-piece molded construction, and made 100% in-house. Surge ST ankle straps are wide and asymmetrical around the boot for incredible all-around support. Toe straps are designed to be used as a toe cap, but also fit nicely as a traditional strap across the top of the boot.
Ladders and adjusters are produced in-house with unique thermoplastics that maintain flex over a wide temperature range.
Proven Burton Buckles
Pillow Line Straps – Pillow Line Straps are lightweight, durable, comfortable, waterproof, one-piece molded construction, and made 100% in-house. Surge ST ankle straps are wide and asymmetrical around the boot for incredible all-around support. Toe straps are designed to be used as a toe cap, but also fit nicely as a traditional strap across the top of the boot.
Ladders and adjusters are produced in-house with unique thermoplastics that maintain flex over a wide temperature range.
MOST IMPORTANTLY!
When you shop with us - We're a REAL store with REAL people who use the gear you're looking at above. You can chat with us about your gear. Whether it's support for something technical, help with fit or anything else in-between.
Matter of fact, you can do that now, Contact us with the form below if you have any questions and you'll get a real answer from us asap.
See you out there!
Spark R&D Arc ST Splitboard Bindings
Regular price $799.99 Save $-799.99Cutout baseplate design, medium flex Asym Rip 'N' Flip Highbacks, and a smaller ankle strap with a flex window combine to save valuable grams and deliver a surfy ride down. All Arc ST Bindings incorporate our industry-leading Tesla T1 technology. Our Smooth Touring (ST) Tech is featured on our ST Brackets and ST Whammy Bars. These components utilize a proprietary thermoplastic blend that is molded over the metal part reducing friction, increasing durability, and improving touring efficiency.
In the Box: Splitboard bindings, ST Brackets, T1 Heel Rests, mounting screws, and Spark Pocket Tool.
What else do I need? A set of Spark Pucks or Spark Canted Pucks.
Weight: 1.38lbs/ea (628g) - 2.77lbs/pr (1256g) – Medium
Our Arc ST Asym Rip ‘N’ Flip Highback has a moderate amount of glass fiber fill for medium flex and a surfy feel. The bindings feature individual left and right highbacks for improved ergonomics, comfort, and control. The upper section of the highback is flatter giving riders excellent lateral mobility. All Rip ‘N’ Flip Highbacks incorporate a tool-free forward lean adjuster (FLAD) that easily toggles between tour and ride mode.
ST Touring Brackets incorporate the best features of aluminum and thermoplastics. We overmold our custom plastic blend over and through the holes in the aluminum base, forming bushings that last four times longer than their previous brass version.
The ST Whammy Bar climbing wire is built right into the baseplate. Overmolded plastic where the bar contacts the baseplate allows for super-smooth climbing wire position changes in the steeps. You can switch easily from stowed, to low (12°), to high (18°), and back again while touring.
Pillow Line Straps are lightweight, durable, comfortable, waterproof, one-piece molded construction, and made 100% in-house. Arc ST Ankle Straps are smaller around the boot than the Surge ST and feature a flex window for max agility while maintaining support. Toe straps are designed to be used as a toe cap, but also fit nicely as a traditional strap across the top of the boot.
*** ST Bindings are only compatible with ST Whammy Bars. Likewise, 21/22 and older T1 Bindings are not compatible with ST Whammy Bars and require a standard Whammy Bar.
*** ST Bindings are compatible with older Tesla Brackets with brass bushings. Likewise, 21/22 and older T1 Bindings are compatible with ST Brackets.
MOST IMPORTANTLY!
When you shop with us - We're a REAL store with REAL people who use the gear you're looking at above. You can chat with us about your gear. Whether it's support for something technical, help with fit or anything else in-between.
Matter of fact, you can do that now, Contact us with the form below if you have any questions and you'll get a real answer from us asap.
See you out there!
Spark R&D Arc ST Pro Splitboard Bindings
Regular price $1,099.99 Save $-1,099.99The Arc ST Pro Splitboard Bindings feature all the same great assets as our standard Arc ST Bindings - ST Tech, T1 binding system, Tesla Snap Ramps, maximum baseplate cutouts, surfy Asym Highbacks, Pillow Line Straps with a flex window - but they are tuned up with premium materials and custom components. Learn more about the Pro Series on the Pro Binding Tech page.
In the Box: Splitboard bindings, ST Brackets, T1 Heel Rests, aluminum mounting screws, and Spark Pocket Tool.
What else do I need? A set of Spark Pucks or Spark Canted Pucks.
Weight: 1.25 lbs/ea (567g) - 2.5 lbs/pr (1134g) – Medium
Our Arc ST Pro Asym Rip ‘N’ Flip Highback is made from carbon-reinforced nylon in a ratio designed for medium flex and a surfy feel. This material blend is more responsive, lighter, and stiffer than our standard glass-reinforced highbacks. The bindings feature individual left and right highbacks for improved ergonomics, comfort, and control. The upper section of the highback is flatter giving riders excellent lateral mobility. All Rip ‘N’ Flip Highbacks incorporate a tool-free forward lean adjuster (FLAD) that easily toggles between tour and ride mode.
ST Touring Brackets incorporate the best features of aluminum and thermoplastics. We overmold our custom plastic blend over and through the holes in the aluminum base, forming bushings that last four times longer than their previous brass version.
The ST Whammy Bar Climbing Wire is built right into the baseplate. Overmolded plastic where the bar contacts the baseplate allows for super-smooth climbing wire position changes in the steeps. You can switch easily from stowed, to low (12°), to high (18°), and back again while touring.
Arc ST Pro Pillow Line Straps are made with premium Pebax® plastics. They are lightweight, durable, comfortable, waterproof, one-piece molded construction, and made 100% in-house. Arc ST Ankle Straps are smaller around the boot than the Surge and feature a flex window for max agility while maintaining support. Toe straps are designed to be used as a toe cap, but also fit nicely as a traditional strap across the top of the boot.
MOST IMPORTANTLY!
When you shop with us - We're a REAL store with REAL people who use the gear you're looking at above. You can chat with us about your gear. Whether it's support for something technical, help with fit or anything else in-between.
Matter of fact, you can do that now, Contact us with the form below if you have any questions and you'll get a real answer from us asap.
See you out there!
Spark R&D Surge ST Pro Splitboard Bindings
Regular price $1,149.99 Save $-1,149.99Surge ST Pro Splitboard Bindings feature all the same great assets as our standard Surge ST Bindings - ST Tech, T1 Binding System, Tesla Snap Ramps, solid baseplates, stiff Asym Highbacks, responsive Pillow Line Straps - but they are tuned up with premium materials and custom components. Learn more about the Pro Series on the Pro Binding Tech page.
In the Box: Splitboad bindings, ST Brackets, T1 Heel Rests, aluminum mounting screws, and Spark Pocket Tool.
What else do I need? A set of Spark Pucks or Spark Canted Pucks.
Weight: 1.36 lbs/ea (620g) - 2.73 lbs/pr (1240g) – Medium
Our Surge ST Pro Asym Rip ‘N’ Flip Highback is made from carbon-reinforced nylon in a ratio designed for a stiff ride and maximum response. The bindings feature individual left and right highbacks for improved ergonomics, comfort, and control. The upper section of the highback is flatter giving riders excellent lateral mobility. All Rip ‘N’ Flip Highbacks incorporate a tool-free forward lean adjuster (FLAD) that easily toggles between tour and ride mode.
ST Touring Brackets incorporate the best features of aluminum and thermoplastics. We overmold our custom plastic blend over and through the holes in the aluminum base, forming bushings that last four times longer than their previous brass version.
The ST Whammy Bar Climbing Wire is built right into the baseplate. Overmolded plastic where the bar contacts the baseplate allows for super-smooth climbing wire position changes in the steeps. You can switch easily from stowed, to low (12°), to high (18°), and back again while touring.
Surge ST Pro Pillow Line Straps are made with premium Pebax® plastics. They are lightweight, durable, comfortable, waterproof, one-piece molded construction, and made 100% in-house. Surge ST Ankle Straps are wide and asymmetrical around the boot for incredible all-around support. Toe straps are designed to be used as a toe cap, but also fit nicely as a traditional strap across the top of the boot.
*** ST bindings are only compatible with ST Whammy Bars. Likewise, 21/22 and older T1 bindings are not compatible with ST Whammy Bars and require a standard Whammy Bar.
*** ST bindings are compatible with older Tesla brackets with brass bushings. Likewise, 21/22 and older T1 Bindings are compatible with ST Brackets.
MOST IMPORTANTLY!
When you shop with us - We're a REAL store with REAL people who use the gear you're looking at above. You can chat with us about your gear. Whether it's support for something technical, help with fit or anything else in-between.
Matter of fact, you can do that now, Contact us with the form below if you have any questions and you'll get a real answer from us asap.
See you out there!
Union 2024 Custom House Forrest Shearer Charger Pro Splitboard Bindings
Regular price $1,099.99 Save $-1,099.99Fast on the way up, even faster on the way down. Powered by blue flames and Italian croissants, Forrest Shearer's Charger Pro splitboard binding will ensure you beat everyone to the top of the skin track. Prepare to roast turns as you rip down the steepest lines in sight and chill out with an ice cold bevy waiting for you in your limited edition carrying case at the bottom. Let’s make splitboarding fun again.
All bindings include: Mounting hardware, Charger split disk w/ magnesium adapter plates, Charger quiver disk w/ magnesium adapter plates, touring brackets, and splitboard strap.Flex Rating – 9 (1 Soft - 10 Stiff)
hen your splitboard bindings ride like your regular bindings, it's easy to enjoy the ride down. The SP3 Duraflex CB baseplate is the key ingredient for the best ride feel on the splitboard market today. All backed by a lifetime warranty.
Simply rotate the binding into place, push the rear lever down, and you're ready to ride. Union's all-new dual lock system is the future of splitboard binding technology. Less time in transition means more time spent riding.
Fast and easy. For help on steep climbs, flip the built in climbing bar down with the end of your touring pole. No additional hardware needed on the splitbaord.
Designed for longer tours and bigger backcountry lines. The EXP4 highback features 15% more fiberglass than our standard EXP3 Duraflex highback. This stiffer new asymmetrical highback shape offers more support on long traverses and quicker edge to edge power for the ride down.
The Exoframe 5.0 ankle strap utilizes tri-axial progressive flex for the perfect boot to binding fit and instant power and response when you’re ready to lay down a hard charging, high speed carve. Easily adjust your ankle strap to any boot with the quick snap of the pin adjustment, no tools needed.
TS 4.0+ toe straps keep you locked in for the ride down without letting you know they're there. A new shorter buckle base helps to reduce weight and pressure points. Easily adjust to any boot with the quick turn of a tool-less adjuster.
Magnesium S1 ratchets are Union’s answer to the elements. A fully integrated spring protected from the harsh outside provides you with Union’s best ratchet to date. Longer life span and better spring return guaranteed.
With zero room for a pin a in the center of the disk, the Charger split disk connection is now stronger than ever. A small notch in the rear split disk allows for the Chargers easy to use lever to lock you into place.
Pull the lever up in the rear baseplate and position the baseplate over the disk at a 90* angle, the lever should align with with the two reference points on the disk. Push the baseplate down onto the disk.
Turn the baseplate counterclockwise until it stops.The bindings rotatoin will help to pull the two halves of the splitboard together allowing for the best possible splitboard connection.
Push the lever down to lock the binding into place. You're now ready to strap in and enjoy the ride down.
No pins needed. The Charger Touring Bracket is the future of Union Binding splitboard technology. Simple, easy to use, and incredibly light weight.
Turn the baseplate vertical and align it with the bracket tips.
Slide the baseplate inwards until you feel it stop. Be sure to push the baseplate fully into place before pushing down. The baseplate will only release at a full 90* angle.
You're now ready to tour. For help on steep climbs, flip down the heel riser underneath the baseplate and lock securely into place.
Charger Split Disk
Voile Compatible
Charger Quiver Disk
4x2
MOST IMPORTANTLY!
When you shop with us - We're a REAL store with REAL people who use the gear you're looking at above. You can chat with us about your gear. Whether it's support for something technical, help with fit or anything else in-between.
Matter of fact, you can do that now, Contact us with the form below if you have any questions and you'll get a real answer from us asap.
See you out there!